Can You Personalize Names On Ear Gauges?

Tabletop --- the first attempts

With the flash I am recently "tried" to employ. I read something and get it it's not really
... It is also a darn complex issue ... :-( Now I have just my 2 flashes
arrested and tried with the tabletop a few settings ....

The results are not really crisp, above all, I must only "hundreds" of shooting test images to see what all the settings. Well, I have to read but still a lot to learn and try. It is milked for mice.

In this picture I had the following structure:

the Metz flash had placed a power of 1 / 64, the flash head I've got a piece of blue film. I have indirectly flashed on a Styrofoam plate, which beamed back to the background.

The second flash was placed just above the glass and shone directly on it without color film. Result, the water pitcher is illuminated. What was of course pure intentional .... * G *

The camera was set to f16 and 160s.

I love the photo very successful, like the colors and patterns to me really well. If I were to achieve that again would, however, I venture to doubt. It was more a stroke of luck.

Dark Brown Leather Sofa With Wood Floor?

Tabletop --- do it yourself

this week we have built a tabletop itself. The idea came from various contributions from the Internet.

The required equipment we had except the white board, all buried in the cellar. The wood tick
is for ages old and used, but this is not bad.

is Used:

a simple wooden block from the hardware store with hinges Height: 75cm, width 75cm

2 edge rails Tiles, length 70cm

2 wooden slats (width 3-5cm) à 70cm

some wood screws

1 PVC foam board, 50x125cm 3mm

on the folding block must be the side hinges unscrew the legs and screw on top so again that the goat can be opened at a 45 degree angle.

The wooden bar is bolted together with aluminum rail on one foot, whilst allowing the aluminum rail to withstand anything the PVC plate then insert it.

to get

a measure of the other side, the PVC should be screwed into the plate and just stuck profile CAREFULLY bend until you get a flat surface. It depends on the length of the plate.

The second rail in place with the wood lath, insert the disk and off you go with the Fototgrafieren.

The beautiful, the plate can take out, fold the wooden support and stowed away or transported.

The tabletop I have already tested, it is a cool Thing. What's missing is a wooden top bar where you can even attach a flash. Since we'll have to think of something. Otherwise it is a low cost alternative to the tabletops can buy it, especially if you do not ever need.

costs were, all in all, about 30 € or just see what even the standing around in the basement ;-)

What Kind Of Hair Does Lauren London Have

American LaFrance

weekend we are on the tractor and vintage car meeting in Römerberg. There, do I have to for me, so far the most impressive vintage cars seen. It is an American La France of 1916. Built were used
the cars in the U.S. and there as a fire engine. In general, the vehicle had seats 4-6, usually a building with fire pump and possibly a ladder.

With a length of about 6 m and a width of 2m, it is impossible to miss.

behemoth, was converted into a roadster. Behind the chic club chairs, a gasoline tank is constructed of 170 l holds! That makes refueling certainly no fun, but certainly have the drive.

This La France has no windshield, so drivers is and passenger fully exposed to the wind. Thomas Bell, the owner and his wife, however, are best equipped. With an old aviator cap, goggles and gloves, looking out of the 2 really real style. Even the clothes fit perfectly with the car.

There are so many small details fit the 1A to the Red Baron. Small leather bags, leather belts with various things which are firmly tied, old padlocks, the stopwatch on the steering wheel, etc. .. The details have me hooked.

When the vehicle is started, it was thought a storm was on its way , so powerful was the engine noise. The technical data of the engine can acknowledge other men returned with glowing eyes (as long as they do not have to take account of the petrol station).

6 cylinder, 14.5 liter, 120 hp, top speed 150km / h, 2.7 tonnes unladen weight. Alone the motor has a length of 1.50 m and weight of a small car.

the drive of the rear wheels via two huge chains, each having a length of 2m. Braking is only on the rear wheels, each with a shoe brake (manual) and a band brake (foot operated) per wheel is probably a trip by car hard work.

We were
are really impressed, like most visitors to the event. Baron is the wheel was always surrounded by admiring men.
Here, a video on YouTube with the engine sound